Designs and Uses

A beautiful 3" (75mm) high grille available in a wide range of lengths .  At only 8mm thick,  this grille is suitable for recessing into floor or wall and can also be supplied drilled and with fly screen mesh.  The pattern is quite delicate with minimal border.

The length is based on the number of daisies and cut were the pattern allows the grating to be finished with a border. Because of this the lengths shown may be + or - a few mm.

Worldwide shipping available on Daisy Grilles

Daisy Grilles Flyscreen Mesh for Short Daisy Vents Length 3" - 12" ITEM - DAY3SMESH Quantity:   £15 per Length In Stock

ITEM -DAY33 Daisy Grille with one daisy  75x70mm 3 x 3 inch Quantity:   £60 Made to Order 5 Days ITEM -DAY53 Daisy Grille with two daises  75x135mm 3 x 5 inch Quantity:   £75 Made to Order 5 Days ITEM -DAY83 Daisy Grille with three daises  75x195mm 3 x 8 inch Quantity:   £90 Made to Order 5 Days ITEM -DAY103 Daisy Grille with four daises  75x260mm 3 x 10 inch Quantity:   £110 Made to Order 5 Days ITEM -DAY123 Daisy Grille with five daises  75x320mm 3 x 12 inch Quantity:   £125 Made to Order 5 Days   Flyscreen Mesh for mediumt Daisy Vents Length 15" - 24" ITEM - DAY3MMESH Quantity:   £25 per Length In Stock ITEM -DAY153 Daisy Grille with six daises  75x380mm 3 x 15 inch Quantity:   £140 Made to Order 5 Days ITEM -DAY183 Daisy Grille with seven daises  75x450mm 3 x 18 inch Quantity:   £155 Made to Order 5 Days ITEM -DAY213 Daisy Grille with eight daises  75x530mm 3 x 21 inch Quantity:   £170 Made to Order 5 Days ITEM -DAY243 Daisy Grille with nine daises  75x610mm 3 x 24 inch Quantity:   £185 Made to Order 5 Days   Drilling and Insect Mesh The above grilles can be drilled and mesh added. Where drilling and mesh are required, we drill and countersink 4mm holes and supply the mesh trimmed at the corners to allow the screws to pass through. Were mesh is supplied without the holes drilled, the mesh is supplied uncut. If more than one grille needs drilling please amend quantity to number of grilles before checking out. Note the mesh will reduce the free air flow by 33% (1/3rd). ITEM -DrillDay Drill 4 Holes in one Daisy Grille Quantity:   £20

Buy online for 5% discount

All prices shown are exclusive of vat

Items in Cart: Total Cost: View Cart

SPECIFICATIONS
Item	Number of Daises	Nominal size inch	air flow mm2	Nominal size mm
DAY33	1	3x3	2000	70x75
DAY53	2	5x3	4000	135x75
DAY83	3	8x3	6000	195x75
DAY103	4	10x3	8000	260x75
DAY123	5	12x3	10000	320x75
DAY153	6	15x3	12000	380x75
DAY183	7	18x3	14000	450x75
DAY213	8	21x3	16000	530x75
DAY243	9	24x3	18000	610x75

MESH Insertion of mesh behind grilles reduces free air flow by 1/3

Customer Illustrations
	Slingfield Mill, Kidderminster Cast Iron Air Brick Company Product Used... Item DAY153		Adderstone properties Newcastle Item DAY83

Below - Daisy Grilles