British Products Made in British Foundries
Round Flyscreen Mesh
A copper flymesh cut an inch (25mm) diameter larger than the bore to act as a flyscreen for either the 4″ or 5″ conservation vents. The flyscreen will need cleaning from time to time to keep the vent working correctly and it is therefore not suitable for tumble dryer outlets or combustion air supply vents.
Warning: call_user_func() expects parameter 1 to be a valid callback, no array or string given in /www/sites/31e/4ee/www.castironairbricks.co.uk/web/shop/wp-content/themes/sommerce/woocommerce/single-product/tabs/tabs.php on line 35
Conservation Vent Grilles
If ever there was a ventilation grille that was suitable for a listed building then this is it. In fact, our customers say it's an enhancement to the exterior of their property. That's one reason why we named it "The Conservation Vent Grille" ( it's also made entirely from 100% recycled iron).
The conservation cowled vent grille is ideally suited to bathroom, cloakroom, tumble dryer outlets and all outlets and inlets where either a 4" (103mm) ducting or 5" (125mm) ducting is used.
The white flexible ducting can be fitted on the spigot at the back of the 4" or 5" vent without any clamps, although a tie wrap or jubilee clip can be fitted if desired.
These grilles are used both in domestic properties and commercial buildings for inlet of fresh air and exhaust of stale air.
Outlet grilles are widely used for extracting air from kitchens, bathrooms, cloakroom and dryers and we have seen a large number of property owners replacing plastic, characterless brown vents with something from this range or from our decorative range. These slotted vent plate grilles are available in various sizes and in three shapes, square, round and rectangular. They can be fitted either into the hole in the wall or over the hole, in the latter case a grille larger than the hole size is required and screwed into the brickwork. We supply most round grilles either drilled or undrilled for this purpose.
Our small round grilles can be installed directly into core-drilled holes such as extractor or dryer vents, subject to them meeting the recommended free air flow of the appliance and therefore aren’t normally supplied drilled.
- Channel Gratings (3)
- Westminster Vents (1)
- Cast Iron Air Bricks (26)
- Flyscreen Air Bricks (3)
- Hit & Miss Air Bricks (3)
- Louvre Air Bricks (3)
- Metric Air Bricks (4)
- Ducting & Wall Sleeves (14)
- Vent & Drainage Grilles (10)
- Round Slotted Grilles (2)
- Made to Measure Square Hole Grilles (1)
- Heritage Grilles (1)
- Long Gratings (7)
- Cast Iron Bearers (1)
- Doorstep Grilles (5)
- Cellar Vents (5)
- Period Vent Grilles (7)
- Coal Hole Covers (3)